| Log In / Register | My Account | VIEW CART | CHECKOUT
Items in cart:    Current Total:
ASA4007-X2Q-S2-R-GPU                                                          (back to configurator)
Server Specifications:


Processor/Cache     Chassis  
CPU Dual 1366-pin LGA Sockets   Form Factor 4U Rackmountable / Tower
  Supports up to two Intel® 64-bit Xeon® processor     Optional Rackmount Kit
  Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor)      
QPI up to 6.4 GT/s   Dimensions  
    Height 7" (178mm)
System Memory   Width 17.8" (452mm)
Memory Capacity 12x 240-pin DIMM sockets   Depth 29.4" (746mm)
  Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory      
  Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory   Front Panel  
  Memory Mirroring supported   Buttons LED Power On/Off button
Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs     System Reset button
DIMM Sizes 1GB, 2GB, 4GB, 8GB   LEDs Hard drive activity LED
Memory Voltage 1.5 V     2x Network activity LEDs
Error Detection Corrects single-bit errors     System Overheat LED
  Detects double-bit errors (using ECC memory)     Power Fail LED
  Supports Intel® x4 and x8 Single Device Data Correction (SDDC)   Ports 2x Front side USB Ports
       
On-Board Devices   Drive Bays  
GPU 4x Nvidia Tesla C1060 GPU Cards   Hot-swap 8x 3.5" Hot-swap SAS/SATA Drive Bays
Chipset Dual Intel® 5520 (Tylersburg) chipset     Supports up to 6 SATA Drives
  ICH10R   Peripheral Bay(s) 3x 5.25" drive bays in storage module -  rotates 90° for Rackmount
SATA Intel ICH10R SATA 3.0Gbps Controller     1x 3.5" fixed drive bay
  RAID 0, 1, 5, 10 support      
Network Controllers Intel® Dual 82574L Gigabit Ethernet   SAS / SATA Backplane SAS / SATA Hard Drive Backplane with SES2
  Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output      
  Intel® I/OAT 3 support for fast, scaleable, and reliable networking   System Cooling  
  VMDq support for better performance of virtualization   Fans 4x 5000 RPM Hot-swap Cooling Fans
Graphics Matrox G200eW     2x 5000 RPM Hot-swap Rear Exhaust Fan
Super I/O Winbond 83827HF chip      
    Power Supply 1400W high-efficiency power supply with PMBus
Expansion Slots   AC Input 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
PCI-Express 4 (x16) PCI-E 2.0 slots     1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
  2 (x4) PCI-E 2.0 (in x16 slots)   DC Output 4 Amp
  1 (x4) PCI-E (in x8 slot)   +5V standby  
PCI 2x 33MHz PCI slots   DC Output 91 Amp @ 100-140V
    +12V 116 Amp @ 180-240V
Input / Output   With Distributor +5V: 30 Amp
Serial ATA Six Serial ATA ports     +3.3V: 24 Amp
  Six SATA hard drives supported     -12V: 0.6 Amp
LAN 2x RJ45 LAN ports      
USB 4x USB rear ports   PC Health Monitoring  
  2x USB on-board   CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  1x USB internal header - 2 ports     6-Phase-switching voltage regulator
  Total 8 USB 2.0 Compliant   FAN Total of eight fan headers supporting up to 8 fans
VGA 1x VGA Port     Eight 4-pin fan headers
Keyboard / Mouse PS/2 keyboard and mouse ports     8x fans with tachometer status monitoring
Serial Port / Header 1 Fast UART 16550 serial port     Support 3-pin fans (w/o speed control)
  1 Fast UART 16550 serial header (Option)     Low noise fan speed control
    Temperature Monitoring for CPU and chassis environment
System BIOS     Thermal Control for 8x fan connectors
BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS     PECI
BIOS Features Plug and Play (PnP)   Other Features Chassis intrusion detection
  PCI 2.2     Chassis intrusion header
  ACPI up to 3.0      
  USB Keyboard support   Operating Environment  
    RoHS RoHS Compliant
    Environmental Spec. Operating Temperature: 10°to 35°C (50°to 95°F)
      Non-operating Temperature: -40°to 70°C (-40°to 158°F)
      Operating Relative Humidity: 8% to 90% (non-condensing)
        Non-operating Relative Humidity: 5 to 95% (non-condensing)