| Processor/Cache |
|
|
Chassis |
|
| CPU |
Dual 1366-pin LGA Sockets |
|
Form Factor |
1U Rackmount |
|
Supports up to two IntelŽ 64-bit XeonŽ processor(s) |
|
Model |
CSE-818G-1400B |
|
Quad-Core IntelŽ XeonŽProcessor 5500 sequence |
|
|
|
| QPI |
up to 6.4 GT/s |
|
Dimensions |
|
|
|
|
Height |
1.7" (43mm) |
| System Memory |
|
|
Width |
17.2" (437mm) |
| Memory Capacity |
12x 240-pin DIMM sockets |
|
Depth |
28.2" (716mm) |
|
Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory |
|
|
|
|
Memory Mirroring supported |
|
Front Panel |
|
| Memory Type |
1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
Buttons |
Power On/Off button |
| DIMM Sizes |
1GB, 2GB, 4GB, 8GB |
|
|
System Reset button |
| Memory Voltage |
1.5 V |
|
LEDs |
Power LED |
| Error Detection |
Corrects single-bit errors |
|
|
Hard drive activity LED |
|
Detects double-bit errors (using ECC memory) |
|
|
2x Network activity LEDs |
|
Supports IntelŽ x4 and x8 Single Device Data Correction (SDDC) |
|
|
System Overheat LED / Fan fail LED / |
|
|
|
|
UID LED |
| On-Board Devices |
|
|
|
|
| GPU |
2x Nvidia Tesla M1060 GPU Cards |
|
Expansion Slots |
|
| Chipset |
IntelŽ 5520 (Tylersburg) chipset |
|
PCI-Express |
1 (x4) PCI-E 2.0 (in x16 slot -Low Profile) |
|
ICH10R + IOH-36D |
|
|
|
| SATA |
Intel ICH10R SATA 3.0Gbps Controller |
|
Drive Bays |
|
|
RAID 0, 1, 5, 10 support |
|
Hot-swap |
3x 3.5" Hot-swap SAS/SATA drive bays |
|
|
|
|
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
Backplane |
SAS/SATA HDD Backplane |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
|
|
|
|
WinbondŽ WPCM450 BMC |
|
System Cooling |
|
| Network Controllers |
IntelŽ 82576 Dual-Port Gigabit Ethernet Controller |
|
Fans |
8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
|
|
IntelŽ I/OAT 3 support for fast, scaleable, and reliable networking |
|
Power Supply |
1400W high-efficiency power supply with PMBus |
|
VMDq support for better performance of virtualization |
|
AC Input |
1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp |
|
1x Realtek RTL8201N PHY (dedicated IPMI) |
|
|
1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp |
| Graphics |
Matrox G200eW 8 MB DDR2 |
|
DC Output |
4 Amp |
| Super I/O |
Winbond W83527HG chip |
|
+5V standby |
|
| Clock Generator |
932S421 chip |
|
DC Output |
100 Amp @ 100-140V |
|
|
|
+12V |
116 Amp @ 180-240V |
| Input / Output |
|
|
|
|
| Serial ATA |
Six Serial ATA ports |
|
PC Health Monitoring |
|
|
Six SATA hard drives supported |
|
CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. |
| LAN |
2x RJ45 LAN ports |
|
|
CPU Core 6-Phase-switching voltage regulator |
|
1x RJ45 Dedicated IPMI LAN port |
|
FAN |
Total of four 4-pin PWM fans |
| USB |
2 rear + 1 header (2 Ports) |
|
|
4x fans with tachometer monitoring |
|
4 total USB ports, 2.0 Compliant / 1.1 Compliant |
|
|
Status monitor for speed control |
| VGA |
1x VGA Port |
|
|
Status monitor for on/off control |
| Serial Port |
1 Fast UART 16550 serial port |
|
|
Low noise fan speed control |
| Video |
2 Video Connectors |
|
Temperature |
Monitoring for CPU and chassis environment |
|
|
|
|
CPU thermal trip support |
| System BIOS |
|
|
|
Thermal Control for 4x Fan Connectors |
| BIOS Type |
32Mb SPI Flash EEPROM with AMIŽ BIOS |
|
|
PSU I2C temperature sensing logic |
| BIOS Features |
Plug and Play (PnP) |
|
|
Thermal Monitor 2 (TM2) support |
|
PCI 2.2 |
|
|
PECI |
|
ACPI up to 3.0 |
|
LED |
Power Fail / Overheat LED |
|
USB Keyboard support |
|
|
Suspend-state Indicator LED |
|
|
|
|
UID LED |
|
|
|
Other Features |
SDDC Support |
|
|
|
|
|
|
|
|
Operating Environment |
|
|
|
|
RoHS |
RoHS Compliant |
|
|
|
Environmental Spec. |
Operating Temperature: 10° to 35° C (50° to 95°F) |
|
|
|
|
Non-operating Temperature: -40° to 70° C (-40° to 158° F) |
|
|
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
|
|
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
