| Processor/Cache |
|
|
Chassis |
|
| CPU |
Quad 604-pin FC-PGA6 Sockets |
|
Form Factor |
1U Rackmount |
| |
Supports up to four Intel® 64-bit Xeon® MP processor(s) |
|
|
|
| |
6-Core Intel® Xeon® |
|
Dimensions |
|
| |
Processor 7400 sequence |
|
Height |
1.7" (43mm) |
| |
Quad-Core Intel® Xeon® |
|
Width |
17.2" (437mm) |
| |
Processor 7300 sequence |
|
Depth |
27.75" (705mm) |
| System Bus |
1066 MHz system bus |
|
|
|
| OS Software |
Supports 64-bit Operating Systems |
|
Front Panel |
|
| |
Supports 32-bit Operating Systems |
|
Buttons |
Power On/Off button |
| |
|
|
|
System Reset button |
| System Memory |
|
|
LEDs |
Power LED |
| Memory Capacity |
Twenty-four 240-pin DIMM sockets |
|
|
Hard drive activity LED |
| |
Supports up to 192 GB 667 / 533MHz DDR2 ECC FB-DIMM memory |
|
|
2x Network activity LEDs |
| |
Quad branch memory bus |
|
|
System Overheat LED |
| |
Memory must be populated in pairs |
|
|
|
| |
Memory Mirroring supported |
|
Expansion Slots |
|
| Memory Type |
667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit |
|
PCI-Express |
1 x8 PCI-e Slot |
| DIMM Sizes |
1GB, 2GB, 4GB, 8GB |
|
Drive Bays |
|
| Memory Voltage |
1.8V only |
|
Hot-swap |
3x 3.5" Hot-swap SATA Drives Supported |
| |
1.5V(AMB) |
|
SATA Backplane |
|
| Error Detection |
Corrects single-bit errors |
|
|
1U SATA / SAS Backplane |
| |
Detects double-bit errors (using ECC memory) |
|
|
|
| |
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
Peripheral Drives |
|
| |
|
|
DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM drive |
| On-Board Devices |
|
|
|
|
| Chipset |
Intel® 7300 (Clarksboro) chipset |
|
System Cooling |
|
| |
ESB2 |
|
Fans |
6x heavy-duty counter-rotating fans with optimal fan speed control |
| SATA |
Intel ESB2 SATAII Controller |
|
Shroud |
1x Air Shroud for CPU |
| |
RAID 0, 1, 5, 10 support (Windows) |
|
|
|
| |
RAID 0, 1, 10 support (Linux) |
|
Power Supply |
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
|
1000W AC-DC high-efficiency power supply w/ PFC + PDB |
| |
200-pin IPMI slot (SIMSO) |
|
AC Voltage |
100 - 240V, 50 - 60Hz, 15 - 7Amp |
| |
(Optional: AOC-SIMSO(+)) |
|
+5V standby |
4 Amp |
| |
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) |
|
+12V |
83 Amp |
| Network Controllers |
Intel® 82575EB Dual-Port Gigabit Ethernet Controller |
|
+5V |
20 Amp |
| |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
+3.3V |
20 Amp |
| |
Intel® I/OAT support for fast, scaleable, and reliable networking |
|
-12V |
0.6 Amp |
| Graphics |
ATI ES1000 controller with 32 MB of video memory |
|
|
|
| Super I/O |
Winbond 83627HF chip |
|
PC Health Monitoring |
|
| Clock Generator |
CK410B chip |
|
CPU |
Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, |
| |
|
|
|
+3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset |
| Input / Output |
|
|
|
CPU Core 6-Phase-switching voltage regulator |
| Serial ATA |
Six Serial ATA ports |
|
|
with auto-sense from 0.8375V-1.60V |
| IDE |
Single EIDE channel supports up to two UDMA |
|
FAN |
Total of nine 4-pin fans |
| |
IDE devices(IDE-M, IDE-S) including CF card |
|
|
9x fans with tachometer monitoring |
| |
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
Status monitor for speed control |
| |
Compact Flash (40-pin connector, IDE 1, single channel) slot |
|
|
Status monitor for on/off control |
| Floppy |
1 Floppy controller; 1.44 MB, 2.88 MB |
|
|
Support for 3-pins (w/ speed control) |
| LAN |
2x RJ45 LAN ports |
|
|
Low noise fan speed control |
| USB |
2x USB rear ports |
|
|
Pulse Width Modulated (PWM) fan connectors |
| |
3x USB internal header |
|
Temperature |
Monitoring for CPU and chassis environment |
| |
5 total USB ports, 2.0 Compliant / 1.1 Compliant |
|
|
CPU thermal trip support |
| VGA |
1x VGA Port |
|
|
Thermal Control for 9x Fan Connectors |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
|
PSU I2C temperature sensing logic |
| Serial Port / Header |
1 Fast UART 16550 serial port |
|
|
Thermal Monitor 2 (TM2) support |
| |
1 Header |
|
|
PECI |
| |
|
|
LED |
CPU / System Overheat LED |
| System BIOS |
|
|
|
Suspend-state Indicator LED |
| BIOS Type |
8Mb Flash EEPROM with AMI ® BIOS |
|
Other Features |
Chassis intrusion detection |
| BIOS Features |
Plug and Play (PnP) |
|
|
Chassis intrusion header |
| |
APM 1.2 |
|
|
Chipkill Support |
| |
DMI 2.3 |
|
|
|
| |
PCI 2.2 |
|
Operating Environment |
|
| |
ACPI 1.0/2.0 |
|
Compliance |
|
| |
USB Keyboard support |
|
Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F) |
| |
Hardware BIOS Virus protection |
|
|
Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
| |
SMBIOS 2.3 |
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
| |
|
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
