| Processor/Cache |
|
|
Chassis |
|
| CPU |
Dual 771-pin LGA Sockets |
|
Form Factor |
1U Rackmount |
| |
Supports up to Dual Intel® 64-bit Xeon®processor |
|
|
|
| |
Quad-Core Intel® |
|
Dimensions |
|
| |
Xeon®Processor |
|
Height |
1.7" (43mm) |
| |
5400/5300LV sequence (Harpertown/Clovertown) |
|
Width |
17.2" (437mm) |
| |
|
|
Depth |
25.6" (650mm) |
| System Bus |
1600 / 1333 / 1066 MHz system bus |
|
|
|
| |
|
|
Front Panel |
|
| System Memory |
|
|
|
System Reset Button |
| Memory Capacity |
Eight 240-pin DIMM sockets |
|
|
UID Button |
| |
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory |
|
LEDs |
Power LED |
| |
Dual branch memory bus |
|
|
Hard drive activity LED |
| |
Memory must be populated in pairs |
|
|
2x Network activity LEDs |
| |
Memory Sparing supported |
|
|
System Overheat LED |
| Memory Type |
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit |
|
|
Universal Information (UID) LED |
| DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
|
Ports |
2x USB & DB9 COM port tray (Optional) |
| Memory Voltage |
1.8 V or 1.5 V |
|
|
|
| Error Detection |
Corrects single-bit errors |
|
Expansion Slots |
|
| |
Detects double-bit errors (using ECC memory) |
|
Left Slot |
2 (x8) PCI-e (Gen 2.0) Slot |
| |
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
Right Slot |
1 (x8) PCI-e (Gen 2.0) Slot (Low profile size w/ 5.5" length) |
| |
|
|
|
|
| On-Board Devices |
|
|
Drive Bays |
|
| Chipset |
Intel® 5400 (Seaburg) chipset |
|
Hot-swap |
4x 3.5"SATA Hot-swap drive trays |
| |
MCH + ESB2 |
|
|
|
| SATA |
Intel ESB2 SATA 3.0Gbps Controller |
|
Peripheral Drives |
|
| |
RAID 0, 1, 5, 10 support (Windows only) |
|
DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM drive |
| |
RAID 0, 1, 10 support (Linux) |
|
|
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 / 1.5 |
|
SAS/SATA Backplane |
|
| |
200-pin IPMI slot (SIMSO(+)) |
|
|
1U SAS/SATA Backplane w/ SES2 Enclosure Management |
| |
(Optional: AOC-SIMSO(+)) |
|
|
|
| |
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) |
|
System Cooling |
|
| Network Controllers |
Intel® 82575EB Dual-Port Gigabit Ethernet Controller |
|
Fans |
4x Cooling Fans |
| |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
2x Optional cooling fans for add-on cards |
| |
Intel® I/OAT support for fast, scaleable, and reliable networking |
|
Shroud |
1x Air Shroud |
| Graphics |
ATI ES1000 controller with 32 MB of video memory |
|
|
|
| Super I/O |
Winbond 83627HF chip |
|
Power Supply |
|
| Clock Generator |
ICS 401 chip |
|
|
560W AC power supply w/ PFC (20-pin) |
| |
|
|
AC Voltage |
100 - 240V, 50 - 60Hz, 8.5 - 4Amp |
| Input / Output |
|
|
+5V |
25 Amp |
| Serial ATA |
Six Serial ATA ports |
|
+5V standby |
3 Amp |
| |
Six SATA hard drives supported |
|
+12V |
43.6 Amp |
| IDE |
Single EIDE channel supports up to two UDMA IDE devices |
|
-12V |
0.6 Amp |
| |
(IDE-M, IDE-S) including CF(Compact Flash) Card |
|
+3.3V |
21 Amp |
| |
Compact Flash (40-pin connector, IDE 1, single channel) slot |
|
Certification |
80 PLUS 80 PLUS Certified |
| |
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
|
| Floppy |
1 Floppy controller; 1.44 MB |
|
System BIOS |
|
| LAN |
2x RJ45 LAN ports |
|
BIOS Features |
Plug and Play (PnP) |
| USB |
2x USB rear ports |
|
|
DMI 2.3 |
| |
3x USB internal headers |
|
|
PCI 2.2 |
| |
Total 5 USB 2.0 Compliant / 1.1 Compliant |
|
|
ACPI 1.0 / 2.0 |
| VGA |
1x VGA Port |
|
|
USB Keyboard support |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
|
SMBIOS 2.3 |
| Serial Port / Header |
1 Fast UART 16550 serial port |
|
|
|
| |
1 Fast UART 16550 serial header |
|
Operating Environment |
|
| |
|
|
Compliance |
RoHS 5/6 |
| |
|
|
|
RoHS Compliant 5/6, Server Exemption |
| |
|
|
Environmental Spec. |
Operating Temperature: 10° to 35°C (50° to 95°F) |
| |
|
|
|
Non-operating Temperature: -40° to 70°C (-40° to 158°F) |
| |
|
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
| |
|
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
