| Processor/Cache |
|
|
Chassis |
|
| CPU |
Dual 771-pin LGA Sockets |
|
Form Factor |
1U Rackmount |
| |
Supports up to Dual Intel® 64-bit Xeon®processor |
|
|
|
| |
Quad-Core Intel® |
|
Dimensions |
|
| |
Xeon®Processor |
|
Height |
1.7" (43mm) |
| |
5400/5300 sequence (Harpertown/Clovertown) |
|
Width |
17.2" (437mm) |
| |
|
|
Depth |
20" (508mm) |
| System Bus |
1333 / 1066 MHz system bus |
|
|
|
| OS Software |
Supports 64-bit Operating Systems |
|
Front Panel |
|
| |
Supports 32-bit Operating Systems |
|
Buttons |
Power On/Off button |
| |
|
|
|
System Reset button |
| System Memory |
|
|
LEDs |
Power status LED |
| Memory Capacity |
Six 240-pin DIMM sockets |
|
|
HDD activity LED |
| |
Supports up to 48GB 667/ 533MHz DDR2 |
|
|
2x Network activity LEDs |
| |
ECC Register Single/Dual Rank memory |
|
|
|
| |
Dual channel memory bus |
|
Expansion Slots |
|
| |
Memory must be populated in pairs |
|
PCI-Express |
1 (x8) PCI-e slot |
| Memory Type |
667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit |
|
|
|
| DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
|
Drive Bays |
|
| Memory Voltage |
1.8V only |
|
Hot-swap |
8x 2.5" Hot-swap SAS / SATA drive bays |
| Error Detection |
Corrects single-bit errors |
|
|
|
| |
Detects double-bit errors (using ECC memory) |
|
SAS / SATA Backplane |
|
| |
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
|
1x SAS / SATA Backplane |
| |
|
|
|
|
| On-Board Devices |
|
|
System Cooling |
|
| Chipset |
Intel® 5100 (San Clemente) chipset |
|
Fans |
4x 40x28mm high-efficiency fans |
| |
Intel® ICH9R |
|
|
6x fans maximum |
| SAS |
LSI SAS1068E |
|
|
|
| |
RAID 0, 1, 10 support |
|
Power Supply |
|
| |
(Optional: AOC-IButton68) RAID 5 support |
|
|
560W AC to DC power supply w/ PFC |
| SATA |
Intel ICH9R SB SATAII Controller |
|
|
|
| |
RAID 0, 1, 5, 10 support (Windows only) |
|
AC Voltage |
100-240 V, 50-60 Hz, 6.5-2.6 Amp |
| |
RAID 0, 1, 10 support (Linux) |
|
+5V |
15 Amp |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 / 1.5 |
|
+5V standby |
2 Amp |
| |
200-pin IPMI slot (SIMLC) |
|
+12V |
46.5 Amp |
| |
(Optional: AOC-SIMLC) |
|
-12V |
0.5 Amp |
| |
NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only |
|
+3.3V |
15 Amp |
| Network Controllers |
Intel® 82573V & 82573L Gigabit Ethernet Controller |
|
Certification |
80 PLUS Silver |
| |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
80 PLUS Silver Certified |
| Graphics |
XGI Z9 with 32 MB of video memory |
|
|
[ Test Report ] |
| Super I/O |
Winbond 83627DHG chip |
|
|
|
| Clock Generator |
CK505 chip |
|
PC Health Monitoring |
|
| |
|
|
CPU |
Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V |
| Input / Output |
|
|
|
+3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset |
| SAS |
8 SAS / SATA ports |
|
|
CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| Serial ATA |
Six Serial ATA ports |
|
FAN |
Total of eight 4-pin fans |
| |
Four SATA hard drives supported |
|
|
8x fans with tachometer monitoring |
| IDE |
Single EIDE channel supports up to |
|
|
Status monitor for speed control |
| |
two UDMA IDE devices(IDE-M, IDE-S) including CF card |
|
|
Status monitor for on/off control |
| |
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
Support for 3-pins (w/o speed control) |
| |
Compact Flash (40-pin connector, IDE 1, single channel) slot |
|
|
Low noise fan speed control |
| Floppy |
1 Floppy controller; 1.44 MB, 2.88 MB |
|
|
Pulse Width Modulated (PWM) fan connectors |
| LAN |
2x RJ45 LAN ports |
|
Temperature |
Monitoring for CPU and chassis environment |
| USB |
2x USB rear ports |
|
|
CPU thermal trip support |
| |
3x USB internal header |
|
|
Thermal Control for 8x Fan Connectors |
| |
5 total USB ports, 2.0 Compliant / 1.1 Compliant |
|
|
PSU I2C temperature sensing logic |
| VGA |
1x VGA Port |
|
|
Thermal Monitor 2 (TM2) support |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
|
PECI |
| Serial Port / Header |
1 Fast UART 16550 serial port |
|
LED |
CPU / System Overheat LED |
| |
1 Header |
|
|
Suspend-state Indicator LED |
| |
|
|
Other Features |
Chassis intrusion detection |
| System BIOS |
|
|
|
Chassis intrusion header |
| BIOS Type |
8Mb Flash EEPROM with Phoenix ® BIOS |
|
|
Chipkill Support |
| BIOS Features |
Plug and Play (PnP) |
|
|
|
| |
DMI 2.3 |
|
Operating Environment |
|
| |
PCI 2.2 |
|
Compliance |
|
| |
ACPI 1.0/2.0 |
|
|
RoHS 6/6 |
| |
USB Keyboard support |
|
|
|
| |
Hardware BIOS Virus protection |
|
|
RoHS Compliant 6/6, Pb Free |
| |
SMBIOS 2.3 |
|
Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F) |
| |
|
|
|
Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
| |
|
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
| |
|
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
