| Processor/Cache |
|
|
Chassis |
|
| CPU |
Dual 771-pin LGA Sockets |
|
Form Factor |
1U Rackmount |
| |
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: |
|
|
|
| |
Quad-Core Intel® |
|
Dimensions |
|
| |
Xeon®Processor |
|
Height |
1.7" (43mm) |
| |
5400/5300 sequence (Harpertown |
|
Width |
17.2" (437mm) |
| |
/Clovertown processor) |
|
Depth |
14.5" (369mm) |
| |
up to 3.16 GHz |
|
|
|
| |
Dual-Core Intel® |
|
Expansion Slots |
1x full-height half-length expansion slot (Riser Card Required) |
| |
Xeon®Processor |
|
|
|
| |
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz |
|
Drive Bays |
|
| System Bus |
1333 / 1066 MHz system bus |
|
Internal Bay |
1x 3.5" internal drive bay |
| OS Software |
Supports 64-bit Operating Systems |
|
|
|
| |
Supports 32-bit Operating Systems |
|
Peripheral Drives |
|
| |
|
|
DVD-ROM |
Slim 8x DVD / 24x CD-ROM Drive |
| System Memory |
|
|
|
|
| Memory Capacity |
Six 240-pin DIMM sockets |
|
Front Panel |
|
| |
Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory |
|
Buttons |
Power On/Off button |
| |
Dual channel memory bus |
|
|
Reset button |
| |
Memory must be populated in pairs |
|
LEDs |
Power LED |
| Memory Type |
667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit |
|
|
Hard drive activity LED |
| DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
|
|
2x Network activity LEDs |
| Memory Voltage |
1.8V only |
|
|
System Overheat LED |
| Error Detection |
Corrects single-bit errors |
|
Ports |
2x USB Ports (2.0 Ready) |
| |
Detects double-bit errors (using ECC memory) |
|
|
|
| |
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
System Cooling |
|
| |
|
|
Operating Environment |
|
| On-Board Devices |
|
|
|
Operating Temperature: 10 - 35°C |
| Chipset |
Intel® 5100 (San Clemente) chipset |
|
|
Non-operating Temperature: -35 - +60°C |
| |
Intel® ICH9R |
|
|
Humidity range: 5 - 90% non-condensing |
| SATA |
Intel ICH9R SB SATAII Controller |
|
|
|
| |
RAID 0, 1, 5, 10 support (Windows only) |
|
Power Supply |
520W AC to DC power supply w/ PFC |
| |
RAID 0, 1, 10 support (Linux) |
|
|
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 / 1.5 |
|
AC Voltage |
100 - 240V, 50 - 60Hz, 7 - 3Amp |
| |
200-pin IPMI slot (SIMLC) |
|
+5V |
20 Amp |
| |
(Optional: AOC-SIMLC) |
|
+5V standby |
3 Amp |
| |
NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only |
|
+12V |
39 Amp |
| Network Controllers |
Intel® 82573V & 82573L Gigabit Ethernet Controller |
|
-12V |
0.5 Amp |
| |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
+3.3V |
16 Amp |
| Graphics |
XGI Z9 with 32 MB of video memory |
|
|
|
| Super I/O |
Winbond 83627DHG chip |
|
Regulatory (Power Supply) |
|
| Clock Generator |
CK505 chip |
|
Power Supply Safety / EMC |
USA - UL listed, FCC |
| |
|
|
|
Canada - CUL listed |
| Input / Output |
|
|
|
Germany - TUV Certified |
| Serial ATA |
Six Serial ATA ports |
|
|
Europe/CE Mark |
| |
Four SATA hard drives supported |
|
|
EN 60950/IEC 60950-Compliant |
| IDE |
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card |
|
|
|
| |
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
|
| |
Compact Flash (40-pin connector, IDE 1, single channel) slot |
|
|
|
| Floppy |
1 Floppy controller; 1.44 MB, 2.88 MB |
|
|
|
| LAN |
2x RJ45 LAN ports |
|
|
|
| USB |
2x USB rear ports |
|
|
|
| |
3x USB internal header |
|
|
|
| |
5 total USB ports, 2.0 Compliant / 1.1 Compliant |
|
|
|
| VGA |
1x VGA Port |
|
|
|
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
|
|
| Serial Port / Header |
1 Fast UART 16550 serial port |
|
|
|
| |
1 Header |
|
|
|
| |
|
|
|
|
| System BIOS |
|
|
|
|
| BIOS Type |
8Mb Flash EEPROM with Phoenix ® BIOS |
|
|
|
| BIOS Features |
Plug and Play (PnP) |
|
|
|
| |
DMI 2.3 |
|
|
|
| |
PCI 2.2 |
|
|
|
| |
ACPI 1.0/2.0 |
|
|
|
| |
USB Keyboard support |
|
|
|
| |
Hardware BIOS Virus protection |
|
|
|
| |
SMBIOS 2.3 |
|
|
|
