| Processor/Cache |
|
|
Chassis |
|
| CPU |
Single LGA775 ZIF Socket |
|
Form Factor |
1U Rackmount |
| |
Supports a Quad-Core Intel® Xeon® 3300/3200 series processor |
|
|
|
| |
Supports a Dual-Core Intel® Xeon® E3100/3000 series processor |
|
Dimensions |
|
| |
Supports an Intel® Pentium® dual-core E2000/E1000 series processor |
|
Height |
1.7" (43mm) |
| System Bus |
1333 / 1066 / 800 MHz system bus |
|
Width |
17.2" (437mm) |
| |
|
|
Depth |
19.8" (503mm) |
| System Memory |
|
|
|
|
| Memory Capacity |
Four 240-pin DIMM sockets |
|
Front Panel |
|
| |
Supports up to 8 GB of memory (Dual Channel) |
|
Buttons |
Power On/Off button |
| Memory Type |
DDR2 800/667 MHz unbuffered, ECC SDRAM |
|
|
System Reset button |
| DIMM Sizes |
256 MB, 512 MB, 1 GB, 2GB, 4GB |
|
LEDs |
Power LED |
| Memory Voltage |
1.8V only |
|
|
Hard drive activity LED |
| |
|
|
|
2x Network activity LEDs |
| On-Board Devices |
|
|
|
System Overheat / Fan Fail LED |
| Chipset |
Intel 3210 chipset |
|
Ports |
2x Front USB Ports |
| |
ICH9R + PXH + Intel® 82573V + Intel® 82573L |
|
|
1x Serial COM Port |
| Serial ATA |
Intel® ICH9R SATA2 (3 Gbps) controller built-in |
|
|
|
| |
RAID 0, 1, 5, 10 support (Windows Only) |
|
Drive Bays |
|
| |
RAID 0, 1, 10 support (Linux) |
|
Hot-swap |
4x 3.5" SATA Hot-swap drive bays |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
|
|
| |
IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support |
|
System Cooling |
|
| |
SIMSO Slot - Supermicro Intelligement Management |
|
Fans |
4x Cooling Fans |
| |
(Optional: AOC-SIMSO-HTC, AOC-SIMSO+) |
|
|
|
| |
NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function |
|
Power Supply |
Fixed 300W AC power supply module with PFC |
| Network Controllers |
2x Single-port Gigabit PCI-Express Ethernet Controllers |
|
|
[ 24-pin, (4-pin=12V), 4-pin HDD ] |
| |
Intel® 82573V + Intel® 82573L |
|
|
|
| |
Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output |
|
AC Voltage |
100 - 240V, 60-50Hz, 5 Amp |
| VGA |
On-board ATI ES1000 (32MB) graphics |
|
DC Output |
5V + 3.3V ≤ 100W |
| Super I/O |
Winbond 83627DHG chip |
|
+5V |
25 Amp |
| Clock Generator |
CK505 |
|
+5V standby |
2.0 Amp |
| |
|
|
+12V |
24.0 Amp (Max) |
| Expansion Slots |
|
|
-12V |
1.0 Amp |
| PCI-Express |
1 Universal (x8) PCI-e slot (OR) |
|
+3.3V |
15.0 Amp |
| PCI-X |
1 64 bit PCI-X 133 Mhz slot |
|
|
|
| |
|
|
PC Health Monitoring |
|
| Input / Output |
|
|
CPU |
Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset) |
| Serial ATA |
Six Serial ATA ports (3 Gbps performance) |
|
|
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V |
| |
Four SATA hard drives supported |
|
|
Adjustable CPU clock frequency ratio |
| |
External SATA supported |
|
FAN |
Total of six 4-pin fan headers |
| IDE |
One EIDE channel supports up to two UDMA IDE devices |
|
|
6x fans with tachometer monitoring |
| |
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
Status monitor with firmware / software speed control |
| Floppy |
1 Floppy controller; 1.44 MB |
|
|
Status monitor for on/off control |
| LAN |
2x RJ45 LAN ports |
|
|
Support 3-pin fans (without speed control) |
| USB |
Up to 8x USB 2.0 / 1.1 compliant ports |
|
|
Low noise fan speed control |
| |
2 rear ports |
|
|
Pulse Width Modulated (PWM) fan connector |
| |
4 internal headers + 2 on-board |
|
Temperature |
Monitoring for CPU and chassis environment |
| VGA |
1x VGA port |
|
|
CPU Thermal Trip support |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
|
Thermal Monitor (TM2) Support |
| Serial Ports |
1x Fast UART 16550 serial port |
|
|
PECI |
| |
1x internal header |
|
LED |
CPU / System Overheat LED |
| Parallel Port |
1x ECP / EEP Parallel Port |
|
|
+5 Standby alert LED |
| |
|
|
Other Features |
Chassis intrusion detection |
| System BIOS |
|
|
|
Chassis intrusion header |
| BIOS Type |
8MB Flash EEPROM with Phoenix BIOS® |
|
|
|
| BIOS Features |
Plug and Play (PnP) |
|
Operating Environment |
|
| |
DMI 2.3 support |
|
Compliance |
RoHS 6/6 |
| |
PCI 2.2 |
|
|
|
| |
ACPI 1.0/2.0 |
|
|
RoHS Compliant 5/6 |
| |
SMBIOS 2.3 |
|
Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F) |
| |
USB Keyboard support |
|
|
Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
| |
|
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
| |
|
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
| |
|
|
|
|
| |
|
|
|
|
