| Processor/Cache |
|
|
Chassis |
|
| CPU |
Single LGA775 ZIF Socket |
|
Form Factor |
1U chassis with 2 hot-swap SATA bay |
| |
Supports a Quad-Core Intel® Xeon® 3300/3200 series processor |
|
|
max. motherboard size - 12" x 10" ATX |
| |
Supports a Dual-Core Intel® Xeon® E3100/3000 series processor |
|
Dimensions |
|
| |
Supports an Intel® Pentium® dual-core E2000/E1000 series processor |
|
Height |
1.7" (43mm) |
| |
|
|
Width |
16.8" (426mm) |
| System Bus |
1333 / 1066 / 800 MHz system bus |
|
Depth |
22.6" (574mm) |
| |
|
|
|
|
| System Memory |
|
|
Drive Bays |
|
| Memory Capacity |
Four 240-pin DIMM sockets |
|
Internal Bay |
2 x 3.5" SAS / SATA Hot-swap drive bays |
| |
Supports up to 8 GB of unbuffered ECC |
|
|
|
| |
non-ECC DDR2 800/667MHz memory (Dual Channel) |
|
Front Panel |
|
| Memory Type |
DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM |
|
Buttons |
Power On/Off button |
| DIMM Sizes |
256 MB, 512 MB, 1 GB, 2GB |
|
|
System Reset button |
| Memory Voltage |
1.8V only |
|
|
|
| |
|
|
LEDs |
Power LED |
| On-Board Devices |
|
|
|
Hard drive activity LED |
| Chipset |
Intel® 3200 chipset |
|
|
2x Network activity LEDs |
| |
ICH9R chipset |
|
|
System Overheat LED |
| |
|
|
|
|
| Serial ATA |
Intel® ICH9R SATA2 (3 Gbps) controller built-in |
|
System Cooling |
|
| |
RAID 0, 1, 5, 10 support (Windows Only) |
|
Fans |
3x 3-pin Counter-rotating Cooling Fans |
| |
RAID 0, 1, 10 support (Linux) |
|
|
|
| |
|
|
Operating Environment (System) |
|
| IPMI |
Support for 1U Intelligent Platform Management Interface v.2.0 / 1.5 |
|
Operating Temperature Range |
10 - 35°C (50° to 95° F) |
| |
(Optional: AOC-SIMLC-HTC) |
|
Non-Operating Temperature Range |
-40 - +70°C (-40° to 158° F) |
| |
|
|
Humidity Range |
8 - 90% non-condensing |
| Network Controllers |
1x Intel® 82573V Gigabit PCI-Express Ethernet |
|
Non-Operating Humidity Range |
5 - 95% non-condensing |
| |
1x Intel® 82573L Gigabit PCI-Express Ethernet |
|
|
|
| |
Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output |
|
Power Supply |
Fixed 300W AC power supply module with PFC |
| |
|
|
|
[ 24-pin, (4-pin=12V), 4-pin HDD ] |
| VGA |
On-board XGI Volari Z9S 32MB graphics |
|
AC Voltage |
100 - 240V, 60-50Hz, 5 Amp |
| |
|
|
DC Output |
5V + 3.3V ≤ 100W |
| Super I/O |
Winbond 83627HG chip |
|
+5V |
25.0 Amp |
| |
|
|
+5V standby |
2.0 Amp |
| Clock Generator |
CK505 |
|
+12V |
24.0 Amp (Max) |
| |
|
|
-12V |
1.0 Amp |
| Expansion Slots |
|
|
+3.3V |
15.0 Amp |
| PCI-Express |
1 (x8) PCI-E slot or 1 PCI 32 bit with riser card |
|
|
|
| |
|
|
Regulatory (Power Supply) |
Power Supply Safety / EMC |
| Input / Output |
|
|
|
USA - UL listed, FCC |
| Serial ATA |
Six Serial ATA ports (3 Gbps performance) |
|
|
Canada - CUL listed |
| |
Six SATA hard drives supported |
|
|
Germany - TUV Certified |
| |
|
|
|
Europe/CE Mark |
| Floppy |
1 Floppy controller; 1.44 MB |
|
|
EN 60950/IEC 60950-Compliant |
| |
|
|
|
|
| LAN |
2 x RJ45 LAN port |
|
PC Health Monitoring |
|
| |
|
|
CPU |
Monitors for CPU Cores +1.8V, +3.3V, +5V, |
| USB |
7x USB 2.0 / 1.1 compatible |
|
|
±12V, 3.3V Standby, 5V Standby, VBAT |
| |
2 rear + 2 headers ( 4 ports ) + 1 on-board |
|
|
CPU 4-Phase-switching voltage regulator |
| |
|
|
|
with auto-sense from 0.8375V-1.6000V |
| VGA |
1x VGA Port |
|
|
Adjustable CPU clock frequency ratio |
| |
|
|
|
(Only available if CPU is supported) |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
|
|
| |
|
|
FAN |
Total of six 4-pin fan headers |
| Serial Ports |
1x Fast UART 16550 serial port |
|
|
6 fans with tachometer monitoring |
| |
1x Header |
|
|
Status monitor with firmware speed control |
| |
|
|
|
Low noise fan speed control |
| System BIOS |
|
|
|
Status monitor for on/off control |
| BIOS Type |
8Mb Flash EEPROM with Phoenix BIOS® |
|
|
Support 3-pin fans (without speed control) |
| BIOS Features |
Plug and Play (PnP) |
|
|
Pulse Width Modulated (PWM) fan connector |
| |
DMI 2.3 support |
|
|
|
| |
PCI 2.2 |
|
Temperature |
Monitoring for CPU and chassis environment |
| |
ACPI 1.0/2.0 |
|
|
CPU thermal trip support |
| |
USB Keyboard support |
|
|
Thermal Monitor 2 (TM2) support |
| |
SMBIOS 2.3 |
|
|
PECI |
| |
|
|
|
|
| |
|
|
LED |
CPU / System Overheat LED |
| |
|
|
|
Suspend state indicator LED |
| |
|
|
|
Standby Power alert LED |
| |
|
|
|
|
| |
|
|
Other Features |
Chassis Intrusion Detection |
| |
|
|
|
Chassis Intrusion Header |
| |
|
|
|
|
| |
|
|
Operating Environment |
|
| |
|
|
Compliance |
RoHS 6/6 |
| |
|
|
|
RoHS Compliant 6/6, Pb Free |
| |
|
|
|
|
| |
|
|
Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F) |
| |
|
|
|
Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
| |
|
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
| |
|
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
