| Processor/Cache |
|
|
Chassis |
|
| CPU |
LGA 1366 Socket |
|
Form Factor |
1U Rackmount |
|
Intel® Core™ i7-965 processor Extreme Edition (3.2 GHz) |
|
|
|
|
Intel® Core™ i7-940 processor (2.93 GHz) |
|
Dimensions |
|
|
Intel® Core™ i7-920 processor (2.66 GHz) |
|
Height |
1.7" (43mm) |
|
Intel® Nehalem 3500 / 5500 Series processor families |
|
Width |
16.8" (426mm) |
| System Bus |
QPI (up to 6.4 GT/s) |
|
Depth |
14.0" (356mm) |
|
|
|
|
|
| System Memory |
|
|
Front Panel |
|
| Memory Capacity |
Supports up to 24 GB 1333 / 1066 / 800MHz |
|
Buttons |
Power On/Off button |
|
DDR3 ECC / non-ECC Un-Buffered memory |
|
|
System Reset button |
|
Three Channel memory bus |
|
LEDs |
Power LED |
|
6 DIMM sockets |
|
|
Hard drive activity LED |
| Memory Type |
1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM |
|
|
2x Network activity LEDs |
| DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB |
|
|
System Overheat LED |
| Memory Voltage |
1.5 V |
|
Ports |
2x USB Ports (2.0 Ready) |
| Error Detection |
Corrects single-bit errors |
|
|
|
|
Detects double-bit errors (using ECC memory) |
|
Drive Bays |
|
|
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
Internal Bay |
1x 3.5" internal SATA drive bay |
|
|
|
|
|
| On-Board Devices |
|
|
System Cooling Fans |
1x 100mm blower fan |
| Chipset |
Intel® X58 Express chipset |
|
|
|
|
ICH10R |
|
Power Supply |
200W Low Noise High-Efficiency (85%) AC-DC power supply |
| SATA |
Intel ICH10R SATA (3.0Gbps) Controller |
|
|
with PFC |
|
RAID 0, 1, 5, 10 support |
|
|
|
| Network Controllers |
2x Intel® Gigabit Ethernet Controllers |
|
AC Voltage |
100 - 240V, 50-60Hz, 4-2 Amp Max |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
+5V |
8.0 Amp |
| VGA |
Integrated Graphics |
|
+5V standby |
2.0 Amp |
| Super I/O |
Winbond 83627DHG chip |
|
+12V |
16.0 Amp |
| Clock Generator |
CK505 |
|
-12V |
0.5 Amp |
|
|
|
+3.3V |
8.0 Amp |
| Expansion Slots |
|
|
Certification |
80 PLUS 80 PLUS Certified |
| PCI-Express |
1 (x16) PCI-e 2.0 slot via riser card |
|
|
|
|
|
|
PC Health Monitoring |
|
| Input / Output |
|
|
CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby |
| Serial ATA |
6 SATA ports |
|
|
+5V Standby, VBAT, HT, Memory, Chipset Voltages. |
|
6 SATA hard drives supported |
|
|
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| Floppy |
1 Floppy controller; 1.44 MB |
|
FAN |
Total of six fan headers supporting up to 6 fans |
| LAN |
2x RJ45 LAN ports |
|
|
Six 4-pin fan headers |
| USB |
2x USB rear ports |
|
|
6x fans with tachometer status monitoring |
|
2x USB on-board |
|
|
Status monitor for speed control |
|
21x USB internal header(4 ports) |
|
|
Status monitor for on/off control |
|
Total 8 USB 2.0 Compliant |
|
|
Support 3-pin fans (w/o speed control) |
| VGA |
1x VGA port |
|
|
Low noise fan speed control |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
|
Pulse Width Modulated (PWM) fan connectors |
| Serial Port / Header |
1x Fast UART 16550 serial port |
|
Temperature |
Monitoring for CPU and chassis environment |
|
1x internal header |
|
|
CPU thermal trip support |
|
|
|
|
FC temperature sensing logic |
| System BIOS |
|
|
|
Thermal Monitor 2 (TM2) support |
| BIOS Type |
4Mb SPI Flash EEPROM with AMI BIOS |
|
|
PECI |
| BIOS Features |
DMI 2.3 |
|
LED |
CPU / System Overheat LED |
|
PCI 2.2 |
|
|
+5V Standby alert LED |
|
ACPI 1.0 / 2.0 |
|
Other Features |
Chassis intrusion detection |
|
USB Keyboard support |
|
|
Chassis intrusion header |
|
SMBIOS 2.3 |
|
|
|
|
|
|
Operating Environment / |
|
|
|
|
Compliance |
|
|
|
|
RoHS |
RoHS 6/6 |
|
|
|
|
RoHS Compliant 6/6, Pb Free |
|
|
|
Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F) |
|
|
|
|
Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
|
|
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
|
|
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
